DIXIE NARCO 276E & 276HVV SODA VENDING MACHINE 16.9oz BOTTLE CONVERSION KIT

Description

Snack Attack Vending LLC
is offering a
Dixie Narco 276E & 276 HVV Single Column
16.9oz Bottle
conversion kit.
This is for the Dixie Narco
drink vending machine model 276E & 276HVV.
This kit is used to convert from 20oz bottles to 16.9oz.
The set consists of (7) single column rods & yellow sleeves. The yellow sleeves are for Pepsi products only. Coke products just get metal rod. This conversion kit is brand new from factory.
Single Column Setup Instructions:
Power down machine before installing shims. If not already, start by adjusting the single brown vend motor cam discs. Lightly pull disc tab towards you and turn disc
clockwise
to
#5 hole
snaps in. You should have 2 notches on disc for 2 deep bottles.
Take springs off "sold out" flappers above vend motor. Power machine up and pull out white door button located between coin mech & bill validator. This will reset vend motor cams. Now vend each single column brown vend motor so that the rotor cup is in the
right, 5:00 o'clock position
. This will allow you to insert rod & yellow sleeve in rotor cup holes from above can ramp. Insert the rod & sleeve first hole towards you. Then take your 16.9oz bottle and slide in between rotor rod and metal shim to make sure that bottle will sit in there without dropping down.
Attach "sold out" springs and load machine to test vend & prime down bottles till they vend out.